Tach42 3 axis board
Rated • 1 review • electronics, electronic parts, diy, cnc • pminmo.com
DIY 3 axis CNC driver board. Single sided construction, 5-6 amps. Parts list, schematic, PCB mask in PDF, everything you need.
From the page: "This board is one single sided PCB which is capable of being manufactured by the DIY'er. It utilizes a DB25 connector that is configured to use a standard DB25 cable assembly for PC connection. It is capable of handling stepper motors with power supplies up to 35V. The MOSFET drivers are capable of very high current drive (>20A). However depending on the PCB material shouldn't be used at currents greater than 5 or 6A, without beefing up the traces from the FET's to the connector."
From the page: "This board is one single sided PCB which is capable of being manufactured by the DIY'er. It utilizes a DB25 connector that is configured to use a standard DB25 cable assembly for PC connection. It is capable of handling stepper motors with power supplies up to 35V. The MOSFET drivers are capable of very high current drive (>20A). However depending on the PCB material shouldn't be used at currents greater than 5 or 6A, without beefing up the traces from the FET's to the connector."
